search banks, 1-10.
Search Limit Search Range (MHz) Description
Bank
1 29.0000-54.0000 10-Meter Amateur Radio,
VHF Lo, 6 -Meter Amateur
Radio
2 108.0000-136.9750 Aircraft
3 137.0000-174.0000 Government, 2 -Meter
Amateur Radio, VHF Hi
4 380.0000-512.0000 Military Aircraft, UHF
Lo, 70 -Centimeter
Amateur Radio, UHF "T"
Band, Government
5 806.0000-815.2875 UHF Public Service
6 815.3000-820.7375 UHF Public Service
7 820.7500-824.0000 UHF Public Service
8 849.0000-869.0000 UHF Hi
9 894.0000-960.0000 UHF-Hi, 33-Centimeter
Amateur Radio
10 29.0000-960.0000 All Frequencies
Follow these steps to select the preprogrammed limit search ranges and
search them for active frequencies.
1. Press LIMIT. L and the last selected search bank number appear, and
the bar under the selected bank number flashes.
2. Using the number keys, enter the search bank number for each limit
search range you want to remove or select. When a bank is selected,
a bar appears under it.
NOTE: To select bank 10, press 0.
3. To step through the selected band upward or downward in small
increments (in steps of 5, 12.5 or 25 kHz depending on the band),
press and release UP ARROW or DOWN ARROW.
On hold down UP ARROW for about 1 second to search from the lower to
the upper limit, or DOWN ARROW to search from the upper to th e lower
limit. As the scanner searches, it displays SEARCH, and the bar under
the current search bank number flashes.
When the scanner finds an active frequency, it stops searching.
NOTES: To reverse the rapid search direction at any ti me, hold down
UP ARROW or DOWN ARROW for about 1 second.
To store the displayed frequency in the lowest available
channel, simply press ENTER. The scanner stores the frequency
and continues to search.
To Next Page
Loading...
