SEARCH BANK - appears with numbers (1-10) when you program limit
search ranges. A bank number with a bar under it shows
it is selected for a limit search.
BANK - appears with numbers (1-10). Bank numbers with a bar under them
show which ones are turned on for scanning.
P - appears with numbers (1-10). Numbers with a bar under them sh ow
which priority channels are turned on.
SCAN - appears when you scan channels.
SEARCH - appears during a band, limit, or direct frequency search.
UP ARROW or DOWN ARROW - indicates the search or scan direction.
WX - appears when you scan the 11 p reprogrammed weather channels.
PROGRAM - appears while you program frequencies into the scanner's
channels, or while you program a limit search range.
DELAY - appears when you program a 2-second delay for a channel.
AUTO - appears while the scanner automatically stores frequencies into
channels.
PRI - appears when the priority feature is turned on.
MON - flashes with a number (1-40) to show which monitor memory you are
listening to.
CH - appears with digits (1-400) to show which channel the scanner is
turned to.
AM/FM - shows which preset mode (AM or FM) the scanner is set to while
scanning and flashes when you change a frequency to the other
mode.
L/OUT - appears when you manually select a channel or frequency you
locked out while scanning or searching.
Error - appears when you make an entry error.
-dUPL- (duplicate) - appears when you try to store a frequency that is
already stored in another channe l.
CH-FULL - appears when all 400 channels are full.
L-FULL - appears when 200 frequencies are locked out during a band,
limit, or direct search.
A-FULL - appears when you select a full bank while auto storing or when
you finish sorting a full bank.
Pri-On- - appears when you turn on the priority feature.
AC-XXCH - appears with a number to show how many empty channels are in
a bank.
Sor. - appears while the scanner sorts frequencies.
To Next Page
Loading...
