The actual search range of Band 04 is 108 -136.975 MHz.
The frequencies in the scanner's search bands are preset. You
cannot change them.
"General Guide to Scanning," Faxback Doc. # 38900 lists other
frequency ranges and the broadcasts you are likely to hear on those
frequencies.
Channel-Storage Banks
To make it easier to identify and select the channels you want to listen
to, channels are divided into 10 channel -storage banks (1-10) of 40
channels each. You can use each channel -storage bank to group
frequencies, such as those used by the police department, fire department,
ambulance services, and aircraft.
For example, there might be three or four police departments in your
area, using several different frequencies. Additionally, there might
be other law enforcement agencies such as state police, county sheriffs,
or SWAT teams that use their own frequencies. You could program all
law enforcement frequencies starting with Channel 1 (the first channel
in Bank 1), then program the fire department, paramedic, and other public
safety frequencies starting with Channel 41 (the first channel in Bank 2).
Monitor Memories
The scanner also has 40 monitor memories that you can use to temporarily
store frequencies while you decide whether to save them into channels.
This is handy for quickly storing an active frequency when you are
searching through an entire band.
You can only store a frequency into a monitor memory during a band, limit,
or direct search. See "Operation," Faxback Doc. # 38898.
You can select monitor memories manually, but you cannot scan them .
To Next Page
Loading...
