11
Plug the speaker cable’s
1
/
8
-inch (3.5-
mm) plug into your scanner’s jack.
Note:
Connecting an external speaker
disconnects the scanner’s internal
speaker.
CONNECTING AN
EARPHONE/
HEADPHONES
For private listening, you can connect
an earphone or headphones with a
1
/
8
-
inch (3.5-mm) plug to the jack on
the front of the scanner. (Your local
RadioShack store carries a wide se-
lection of earphones and head-
phones). This automatically dis-
connects the internal speaker.
Listening Safely
To protect your hearing, follow these
guidelines when you use an earphone
or headphones.
• Do not listen at extremely high
volume levels. Extended high-
volume listening can lead to per-
manent hearing loss.
•Set
VOLUME
to the lowest setting
before you begin listening. After
you begin listening, adjust
VOL-
UME
to a comfortable level.
• Once you set
VOLUME
, do not
increase it. Over time, your ears
adapt to the volume level, so a
volume level that does not cause
discomfort might still damage your
hearing.
20-432.fm Page 11 Friday, July 14, 2000 11:30 AM
To Next Page
Loading...
