37
Beyond the Basics
• “H” is the second letter associated with 4 on the
keypad. Press 4 then 2.
• “A” is the fi rst letter associated with 2 on the
keypad. Press 2 then 1.
• “M” is the fi rst letter associated with 6 on the
keypad. Press 6 then 1.
• A space is entered by pressing ./DELAY.
• “6” is the sixth number associated with 1 on the
keypad. Press 1 then 6.
• “m” is the fi rst letter associated with 6 on the
keypad. Press 6 and FUNC (for the lower case set),
then press 1.
5. Press ENT to input the text.
assigning a text tag to a group ID
1. Press PROG.
2. Press TRUNK.
3. Press FUNC then e or d to select the desired bank.
4. Press TRUNK to select the desired sub-bank.
5. Press or hold down e or d to select the desired
group ID.
6. Press TEXT then enter the tag using the keypad. (See
“Text Input Chart”).
7. Press ENT to store.
To Next Page
Loading...
