64
Beyond the Basics
only when the scanner detects the weather alert
tone.
This scanner cannot set a channel as the priority
channel if the channel’s receive mode is MOT, ED,
or LTR.
If you press PAUSE while the scanner receives the
priority channel, the scanner displays *** PAUSED
*** and stays on the priority channel even after the
transmission fi nished.
To program a frequency in the priority channel:
1. Press MAN.
2. Use the number keys to enter the channel number
which contains the frequency you want to program
as the priority channel. Then press MAN again.
3. Press FUNC then PRI. The display blinks.
To program the priority channel directly:
1. Press PROG.
2. Press PRI.
3. Enter the frequency you want to enter into the
priority channel, then press ENT.
To program a weather channel as the priority channel:
1. Press WX.
2. Select the weather channel you want to program as
the priority channel.
3. Press FUNC then PRI. The display fl ashes two times.
To turn on the priority feature, press
PRI so pri changes
To Next Page
Loading...
