35
Beyond the Basics
fi ve locked out frequency appear as L/O 10 of 25). If the
search bank has no locked-out frequencies, Empty. Lockout
list appears in the scanner’s display. Press SRCH to cancel
reviewing locked-out frequencies.
clearing locked-out search frequencies
To clear a locked-out frequency, select that frequency (see
“Reviewing Locked-Out Search Frequencies”), and then press
CLEAR. If all locked-out frequencies are cleared in a search
bank, Empty. Lockout list appears.
clearing locked-out frequencies
in search banks
1. Press SRCH.
2. Select the search bank where you want to clear all locked-
out frequencies.
3. Press FUNC, L/OUT. Lockout list appears.
4. Press FUNC, 6. Confi rm list clear? 1=YES Press other key for NO
appears. Press 1 to clear all locked-out frequencies. List
cleared briefl y appears.
5. To cancel clear, press any key other than 1.
changing the receive mode
The scanner defaults to the commonly used AM or
FM/Digital receive mode for each frequency range. The
preset mode is correct in most cases; however, some
amateur radio transmissions and trunked systems do
not operate in the preset mode. If you try to listen to a
transmission when the scanner is not set to the correct
receive mode, the transmission might sound weak or
distorted.
To Next Page
Loading...
