43
Beyond the Basics
12. To delete the contents of a V-Scanner folder, select 3. The
scanner will display:
Delete
V-Scanner:
ENTER if YES
CLR to EXIT
13. Press the number key that corresponds with the V-
Scanner folder you wish to clear, or press CLEAR to return
to the V-Scanner menu. If you select a V-Scanner folder,
the scanner will display the name of the V-Scanner
currently stored in that folder, and prompt you to verify
your choice. For example, if you choose V-Scanner Folder
1, the scanner will display:
Delete
V-Scanner:
ENTER if YES
My V-Scanner
14. Press ENT to accept the choice, another number key to
change your selection, or CLEAR to abort and return to
the V-Scanner menu. The scanner gives you one fi nal
opportunity to abort before proceeding:
Delete
V-Scanner: 1
ENT=CONFIRM
My V-Scanner
While the folder is being cleared, the scanner will display:
Clearing
V-Scanner: 1
Please Wait
15. This display appears after each V-Scanner operation.
Pressing ENT will return to the main V-Scanner menu.
Press CLEAR to exit the V-Scanner main menu.
To Next Page
Loading...
