55
Beyond the Basics
clearing all talkgroup IDs in one bank
You can clear all talkgroup IDs within a bank. This lets you
quickly delete all talkgroup IDs from a bank if you want to
use the bank to store different data (such as a new set of
talkgroup IDs).
1. Press PROG.
2. Press TRUNK to enter a talk group ID memory mode.
3. Select a talkgroup ID bank using FUNC,
e or d.
4. Press FUNC, 6. Confi rm list clear? 1=YES Press other key for NO.
appears on the display.
5. Press 1 to clear all talkgroup IDs within a bank. List cleared
appears in the scanner’s display.
To cancel the delete operation, press any key except 1. The
scanner returns to the talkgroup ID memory mode.
To Next Page
Loading...
