Radio Shack PRO-26 - Scanning Channels and Locking Out Frequencies; Locking Out Channels

ALIGNMENT OF SQUELCH
Test Equipment Required and Connections
SG SSVM Oscilloscope
Alignment Procedure
Step
Preset to
Adjustment
Result
1
CH2
SG: 40:840 MHz
NFM
No modulation
Squelch: CW
' ■ .
RT1
Set the SG level so that the voltage at LND8 is
1.2 V ±0.05 V DC.
Adjust RT1 slowly until the squelch opens.
Alignment Point Location (RF PCB)
— 14 —