Radio Shack PRO-26 - Troubleshooting Scanner Issues

EXPLODED VIEW AND DISASSEMBLY INSTRUCTIONS
To remove the front case and rear case,
remove four screws (32) from the rear of the unit.
To remove the top case, puli out the two
knobs @ and the spanner nut from the top case.
Then pull off the top case.
ANTENNA
AT9SI
/ ‘o°aWo°o 0 o'’
* RUBBER
KET80ARD
K50I
L|5§^
SPEAKER
SP90!
SPANNER NUT’
4 ?/
f.o
:S<a
Note: Parts with reference numbers are listed in the “Mechanical Parts List.”
Other parts are listed in the “Electrical Parts List.”