Motorola talk groups
To enter a Type 2 Talk Group ID:
1. Enter the ID you want to store by using the keypad.
2. Press E/PGM.
To enter a Type 1 ID:
For a Type I ID, enter the block number, fl eet number and subfleet number to form the talk group ID number.
For more information, see User Defined Fleet Maps.
1. Enter the ID you want to store by using the keypad (ID = Block number + Fleet number +
./CLR + Subfleet
number).
2. Press
E/PGM.
EDACS talk groups
To enter a Full EDACS ID:
1. Enter the Agency number.
2. Press
./CLR to enter the dash.
3. Enter the fleet number and subfleet number.
4. Press E/PGM.
To enter a Partial EDACS ID:
1. Enter the agency number you want to store. Press ./CLR to enter the dash.
2. Press E/PGM.
Or you can program all the talk group numbers for one fleet of an agency.
1. Enter the agency number.
2. Press
./CLR to enter the dash.
3. Enter the fleet number.
4. Press
E/PGM.
Note: Remember the AFS format allows you to enter full or partial EDACS IDs for powerful flexibility in all
modes. Be sure to read the section “An EDACS Trunked System” to learn how this works.
The scanner defaults to AFS talk group displays for EDACS only.
Entering EDACS Partial Talk Groups
You can enter partial group numbers in an EDACS talk group. By entering only the desired portion of a group,
To Next Page
Loading...
