Priority Channels — lets you program one channel in each bank (10 in all) and then have the scanner check
that channel every 2 seconds while it scans the bank, so you do not miss transmissions on those channels.
Four Service Banks — frequencies are preset in separate police (fire/emergency), aircraft, ham, marine to
make it easy to locate specific types of calls.
Weather Banks— frequencies are preset and allows the scanner to search 7 weather channels (NOAA,
weather)
Auto Backlight — automatically turns on the backlight when the scanner receives signals.
Simultaneous Trunking Operation — allows the scanner to trunk three trunking systems, Motorola and
EDACS, at the same time, as well as conventional systems.
Hypersearch
— lets you set the scanner to search at up to 270 steps per second in frequency bands with 5
kHz steps, compared to the normal search speed of 90 steps per second.
Hyperscan — the scanner automatically scans up to 90 channels per second to help you quickly find
interesting broadcasts.
Key Lock — lets you lock the scanner’s keys to help prevent accidental changes to the scanner’s
programming.
Data Signal Skip — lets you set the scanner to skip non-modulated or data signals (such as fax or modem
transmissions) during scan and searches. This lets the scanner avoid non-voice signals, making a search
faster.
Disconnect Tone Detect — the scanner automatically tunes to the trunking data channel when it receives a
disconnect transmission. You can turn this off, so you can continuously monitor a channel with a weak
transmission where conversations are often disconnected.
Manual Access — lets you directly access any channel.
Liquid-Crystal Display — makes it easy to view and change programming information.
Display Backlight — makes the scanner easy to read in low-light situations.
Key Backlight — makes the keys easy to read in low-light situations.
Flexible Antenna with BNC Connector — provides adequate reception in strong signal areas and is designed
to help prevent antenna breakage. Or, you can connect an external antenna for better reception.
Memory Backup — keeps the frequencies stored in memory for an extended time if the scanner loses power.
Wired Programming— you can connect your scanner to a personal computer and program frequencies into it
using an optional interface cable and software.
Three Power Options — let you power the scanner using internal batteries, external AC power using an
optional AC adapter/charger, or DC power using an optional DC cigarette-lighter power cable.
Key Confirmation Tones — the scanner sounds a tone when you perform an operation correctly, and an error
tone if you make an error.
Battery Save — saves battery power when the scanner does not detect any transmissions for more than 5
seconds when a channel is manually selected.
Battery Low Alert — warns you when battery power gets low.
To Next Page
Loading...
