115
Menu Reference
TSYS
Parameter
Options Description
Dwell 0-200 x
100 mS
Sets the amount of time the
scanner dwells on a Motorola,
P25 or EDACS system control
channel for activity on pro-
grammed talkgroups. Use 0 for
automatic mode, which uses
control channel information
to determine when all current
talkgroup information has been
broadcast by the system.
Digital AGC On or Off Controls Digital AGC function
for the TSYS.
Supertrack On or Off Alternative DSP decoding algo-
rithm. May help reception on
some systems.
Multi-Site Off,
Roam or
Stat
(Station-
ary)
Used with networked Motorola
and P25 trunked radio sys-
tems. When Multi-Site=Off,
the scanner will find the first
usable control channel in the
control channel list and use
it to track the system. When
Multi-Site=Roam, the scanner
will always attempt to lock on
to control channels where the
decoding quality is greater than
Threshold Hi, and will search for
new control channels when the
decoding quality of a control
channel drops below Threshold
Lo. If no control channels are
available that meet the Thresh-
old Hi criteria, the scanner will
seek the best control channel to
use, and continue checking pe-
riodically for a new control chan-
nel that meets the Threshold Hi
criteria. When Multi-Site=STAT,
the scanner will track the system
using every usable control chan-
nel in the control channel list.
To Next Page
Loading...
