117
Menu Reference
LMIT
Parameter
Options Description
Tag Alpha-
numeric
text
The alphanumeric display
name for the LMIT search.
Use the standard text entry
method or QTXT to name the
object.
L/Out On or Off Permanent lockout for the
LMIT channel. Also accessed
by pressing FUNC L/OUT
while the scanner is stopped
on the LMIT object.
LED Mode Solid or
Flash
Controls whether the Alert
LED flashes or remains on sol-
id when the Alert LED is used.
LED Color 0-7 Sets LED color to 0-7 as de-
fined in the GLOB menu. By
default, 0=LED Off, 1=Red,
2=Yellow, 3=Green, 4=Cyan,
5=Blue, 6=Magenta, 7=White.
Latch LED On or Off Normally the Alert LED is ac-
tive only while the object is
receiving a transmission. When
Latch is on, the Alert LED will
remain lit after the transmis-
sion is complete, unless over-
ridden by a subsequent object
that is also using the Alert
LED.
Backlight On, Off
or Flash
Controls whether the backlight
should be on, off or flashing
while the object is active.
Alarm None,
Chirp,
Hi-Lo,
Alert,
Ring,
2-Chirp,
Fast
Hi-Lo,
DTMF#
Sets the Audible Alarm for
the LMIT object. When an
Audible Alarm is selected, the
selected alarm will play any-
time the scanner stops for ac-
tivity on the LMIT object while
scanning.
To Next Page
Loading...
