22
Scanner Setup
Listening Safety
To protect your hearing, follow these earphone or
headphones guidelines:
• Do not listen at extremely high volume levels.
Extended high-volume listening can lead to
permanent hearing loss.
• Set the volume to the lowest setting before
listening. Turn on the scanner, then adjust the
volume to a comfortable level.
• After you set the volume, do not increase
it. Over time, your ears adapt to the volume
level, so a volume level that does not cause
discomfort might still damage your hearing.
• Do not wear an earphone or headphones
with your scanner when operating a motor
vehicle or riding a bicycle in or near traffic.
Doing so can create a traffic hazard and could
be illegal in some areas.
• Even though some earphones/headphones
let you hear some outside sounds when
listening at normal volume, they can still be a
traffic hazard.
Transferring Data To or From another
Scanner or PC
You can transfer the programmed data to and
from another PRO-651 or PRO-65 scanner using
a connecting cable which has 1/8-inch (3.5mm)
stereo (TRS) phone plugs on both ends (not
supplied). See “Cloning” on page 77.
You can also upload or download programmed
data to or from a PC using a USB cable available
through your local RadioShack store or at
RadioShack.com. To find the application software,
we recommend using an internet search engine
to search for “scanner programming software.”
To Next Page
Loading...
