26
Scanner Setup
Delay
Sometimes, several seconds can pass between
transmissions. To avoid missing a reply, a delay is
automatically set for each channel. The scanner
stops for 2 seconds after a transmission stops
before it resumes scanning or searching.
To turn the delay on or off:
Press FUNC •/Delay when the scanner stops on a
transmission. Lowercase
d in the display indicates
delay is off. Uppercase D indicates delay is on.
Note: Delay and delay time can also be set in
each Scannable Object Menu. Search Delay time
can be set in the Global menu. Refer to “Appendix
B: Detailed Menu Reference” on page 102 for a
description of delay settings.
Adjusting the LCD Contrast
You can set the LCD contrast from level 1 to 7.
1. Press PGM for Program Mode.
2. Press GLOB softkey to access Global menu.
3. Press p or q to scroll CONTRAST.
4. Press t or u to select contrast level 1 to 7.
5. Press SAVE softkey to save new setting.
Turning the Key Tone On or Off
Each time you press any of the scanner’s keys, the
scanner beeps.
To turn the scanner’s key tone on or off:
1. Press PGM for Program Mode.
2. Press
GLOB softkey to access Global menu.
3. Press p or q to scroll Key Beeps.
To Next Page
Loading...
