47
Organizing Objects
To activate FAV scan:
Press FAV and the radio suspends scanning of all
objects in the radio except for those that are in
your Favorites list.
To clear FAV scan list:
1. Press PGM to enter Program Mode.
2. Press the
GLOB softkey.
3. Press p or q to scroll to Clear FAV:.
4. Press SEL to set FAV = NO for all objects.
5. Press YES softkey to confirm.
6. Press Save softkey.
Setting the Default Scan List
By default, your scanner will store all new objects,
and objects found during Search, Tune, and
Stalker as mapped to Scan List 01.
You can easily change the default Scan List to any
Scan List you specify, including the special FAV
and Skywarn Scan Lists.
1. Press PGM.
2. Press GLOB softkey.
3. Press q to scroll down to Dflt ScanList.
4. Enter new Scan List number to use as default
scan list.
0: The “not scanned” (ns) Scan List. Objects
with no Scan List mapping.
1 - 20: Normal Scan Lists.
21: FAV Scan List.
22: Skywarn Scan List.
To Next Page
Loading...
