Radio Shack PRO-651 - Permanent Lockout; Change L;OUT Key Function

52
Organizing Objects
53
To unlock a temporary lockout object:
1. In Manual Mode or Program Mode, press
p, q, t or u to select an object.
2. Press L/OUT.
HINT: You can also toggle lockout anytime you
are viewing an object menu in Program Mode by
pressing L/OUT.
Permanent Lockout
Permanent lockout locks out an object until you
explicitly unlock it. No traffic will be received on
the locked out object while permanent lockout is
active.
1. When the scanner stops on an object, press
FUNC, then L/OUT.
or
1. In Manual Mode or Program Mode, press
p, q, t or u to select an object.
2. Press FUNC, then L/OUT.
To unlock a permanent lockout:
1. In Manual Mode or Program Mode, press
p, q, t or u to select an object.
2. Press FUNC, then L/OUT.
Change L/OUT Key Function
By default, the L/OUT key activates temporary
lockout when pressed. To change the L/OUT key
to activate a permanent lockout when pressed:
1. Press PGM to enter Program Mode.
2. Press
GLOB softkey.
3. Press p or q to scroll to TLO=FUNC L/O:.