Radio Shack PRO-66 - Connecting an Extension Speaker; Attaching the Belt Clip

16
CONNECTING AN EXTENSION SPEAKER
In a noisy area, an extension speaker (such as RadioShack Cat. No. 21-
549) or an amplified speaker (such as RadioShack Cat. No. 21-541),
positioned in the right place, might provide more comfortable listening.
Plug the speaker cable’s
1
/
8
-inch mini-plug into your scanner’s jack.
ATTACHING THE BELT CLIP
You can attach the supplied belt clip to make your scanner easier to use
when you are on the go. Use the supplied screws to attach the belt clip
to the scanner. Then slide the belt clip over your belt or waistband.
Belt Clip
20-511.fm Page 16 Wednesday, August 4, 1999 2:13 PM