26
4. Press
MON/0
. The entered frequency appears, and the channel
number starts flashing.
5. Press
WX/E
. The scanner stores the frequency into the selected
channel, and the channel number stops flashing.
SCANNING THE STORED CHANNELS
To scan the stored channels, press
SCAN
. Your scanner then scans
through all non-locked channels (see “Locking Out Channels” on
Page 27).
Using the 2-Second Delay
Many agencies use a two-way radio system that has a period of several
seconds between a query and a reply. To avoid missing a reply, you can
program a 2-second delay into any channel. When the scanner stops on
an active channel with a programmed delay, it continues to monitor the
channel for 2 seconds after the activity stops before resuming scanning.
To program a 2-second delay into a specific channel while the scanner
is scanning, manually select the desired channel then press
DELAY
.
D
appears on the display.
To program a 2-second delay when the scanner has stopped on an ac-
tive channel during scanning, quickly press
DELAY
while the channel
number is displayed.
D
appears on the display.
20-511.fm Page 26 Wednesday, August 4, 1999 2:13 PM
To Next Page
Loading...
