Radio Shack PRO-668 - Priority Scanning

18 19
Conguring Settings
To access configuration settings, select Settings from
the main menu, and press .
DefaultVals
Restores default settings.
SimpleDisplay
Limits the information on the display during
scanning or monitoring.
DefaultPL
The default playlist for scanning and for saving
objects found during searches.
PriorityMode
PriorityTime
Enables Priority Mode, and sets the time
between priority scans. See "Priority
Scanning" on page 10.
EnableRecord
Enables the record feature. See "Recording
and Playback" on page 21.
SearchRecord
Records received search transmissions.
GAttenMode
GAttenOn
Enables Global Attenuation and activates GA.
See "Priority Scanning" on page 10.
SearchDgAGC
Applies Digital AGC to digital transmissions.
GAGCMode
GAGCOn
Enables and activates Global AGC.
PlaySetsOpt
Turns on the PlaySet Feature. See "Play Sets"
on page 17.
Sounds
Alerts
Sets iScan beeps and alert sounds.
Sets alerts: Off, Audio, Visual, Both
KeyBeeps
BeepVolume
Enables or disables key tones and sets key
tone volume.
AlertVolume
Object and low battery alert volume.
Contrast
Sets the LCD contrast.
LModeBAT
LModeEXT
Sets the backlight mode with batteries and
external power: Off, On, Stealth, Normal, Key,
Ignore.
LiteArea
LiteTime
LiteLevel
Sets LCD and keypad lighting.
Backlight duration and brightness.
WelcomeText
1-5
Message when iScan is first turned on.
BlinkTime1-2
Controls the display time for each item.
ShowRadioID
Displays Radio ID (trunked systems).
Tagonly
Displays only display name (trunked systems).
UseRIDAlert
Displays an alert for transmissions with Radio ID.
ShowVC/CC
Displays voice and control channel. Show
Radio ID will override. SimpleDisplay must be
unchecked.
ShowTGID Displays talkgroup ID. SimpleDisplay must be
unchecked.
ShowSite
Name
Displays trunking site name, if two or more
trunking system sites are programmed.
SimpleDisplay must be unchecked.
CONVTGID
CONVRadioID
Displays the talkgroup ID for P25 conventional
talkgroup calls. Displays the Radio ID for P25
conventional calls.
SimpleDisplay must be unchecked.
PC/IFCCDump
Tofile
Limit
TrimLogs
Streams ASCII Control Channel Dump data
over the USB interface for trunking control
channels, stores ASCII Control Channel Dump
data to the microSD card, and sets a limit for
the number of Trim Logs that are sent: 100,
200, 500, 1000.
LowBattTime
Interval (seconds) between low-battery alerts.
ChargeTime
Sets the radio charge time.
TGDisp
Display format for talkgroup IDs.
M36StatBits
Uses status bits to track Motorola 3600 baud
trunking talkgroup calls.
M36ENC
ignores encrypted bits on Motorola 3600 bps
control channel systems
EDACDig
ignores encrypted bits on EDACS control
channel systems
BandPlan
Selects USA or Canada.
FlexStep
Allows smaller steps between frequencies.
EncMode
For encrypted transmissions: Noise, Silent,
or Tone.
EncLevel
Sets the encrypted call tone level.
IFOut
Routes the IF Discriminator signal to the
headphone jack.
DSPLevelAdapt
Controls how fast the DSP adjusts to varying
P25 levels (default: 64). Higher = faster.
ADCGain
Sets input signal to CODEC (default: +0dB).
DACGain
Sets output signal from CODEC, varying the
decoded signal audio level (default: +0dB).
AutoPowerOn
At00:00
Mode:
Turns on your iScan at a specified time, to
a set function: Menu, Scan, Weather, or
Monitor.
PlaceSelect Disables the SetPlace option on the main
menu.
SigBar1-5
Sets the range for the Signal Strength
indicator.
DRAFT
DRAFT