Understanding the Scanner
17
SRCH
Appears during service bank and direct
frequency searches.
SCAN
Appears when the scanner scans channels.
MAN
Appears when you manually select a channel.
PGM
Appears when you program frequencies into
the scanner’s channels.
PRI
Appears when the priority feature is turned on.
DLY
Appears when you program a 2-second delay.
Error
Appears when you make an entry error.
-dUPL-
Appears when you try to store a frequency that
is already stored in another channel.
-d-
Appears during a direct frequency search.
-b-
Appears during a service bank frequency
search (except auto race and marine bank).
CAr
Appears when you listen to the car race
service bank.
CAr No. _ _ _
Appears when you input the car number.
Ch-FULL
Appears when you try to enter a frequency into
a channel during a search when all channels
are full.
F L-out
Appears when you start a direct search from a
locked-out frequency.
FLo-FULL
Appears when you try to lock out a frequency
during a search when 50 frequencies are
already locked out.
L-r
Appears when you review the locked-out
frequencies.
dEFAULt
Appears when you remove all the lock-outs
from the service bank frequencies.
FLo ALL-CL
Appears when you remove all the locked-out
frequencies during a service bank or direct
search.
L-o Ch0000
Appears when you clear all locked-out
channels.
Lo ALL-CL
Appears when you remove all lockouts from
channels.
ALL Ch0000
Appears when you clear all stored channels.
P
Appears when the scanner is tuned to the
priority channel.
To Next Page
Loading...
