Radio Shack PRO-90 - Storing Ids into Scan Lists While Searching; Automatically Storing an ID in a Scan List Location

42
4. Enter the Type II ID you want to store, then press
E
.
Or, to enter a Type I ID:
a. Use the number keys to enter the block number
and the fleet number, then press
•
.
b. Enter the subfleet number, then press
E
.
Note:
To clear a mistake while entering an ID, press
•
twice, then start over at Step 1.
5. Repeatedly press
MANUAL
or s to select the next
scan list location you want to program. Then repeat
Step 4 to enter another ID.
Storing IDs Into Scan Lists While Search-
ing
Follow these steps to select a scan list location and store
an ID during a search.
1. When your scanner stops on an ID you want to
store, press
PRI
. The currently selected scan list
memory location flashes.
2. Press E to store the ID in the selected scan list
memory location. Or, repeatedly press s or t to
select the scan list memory location you want, then
press
E
.
3. Press
SRCH
to resume searching.
Automatically Storing an ID in a Scan List
Location
Follow these steps to store an ID in the first empty scan
list location during a search.
1. When your scanner stops on an ID you want to
store, press
E
. The scanner stores the ID in the dis-
played scan list location.
20-520.fm Page 42 Wednesday, August 4, 1999 3:06 PM