EasyManua.ls Logo

Radio Shack PRO-93 - Additional Preparation Steps

Radio Shack PRO-93
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Preparation
Traffic Safety
Do not wear an earphone or headphones while you drive
a vehicle or ride a bicycle. This can create a traffic haz-
ard and can be illegal in some areas. Even though some
earphones and headphones let you hear some outside
sounds when you listen at normal levels, they still can
present a traffic hazard.
Connecting an Extension Speaker
In a noisy area, an amplified speaker (not supplied),
available at your local RadioShack store, might provide
more comfortable listening. Plug the speaker cable's
1
/
8
-
inch (3.5 mm) mini-plug into your scanner's jack.
Note:
You must use an amplified speaker with this scan-
ner. Non-amplified speakers do not provide sufficient
volume for comfortable listening.
Using the Belt Clip
You can use the belt clip attached to the back of the
scanner for hands-free carrying when you are on the go.
Slide the belt clip over your belt or waistband.
Transferring Data to and from Another
Scanner or a PC
You can transfer the programmed data to and from an-
other PRO-93 or a PRO-2053 using a connecting cable
which has
1
/
8
-inch phone plugs on both ends (not sup-
plied). Connect the cable between each scanner's
PC/IF
jacks. See “Cloning the Programmed Data” on Page 49.
You can also upload or download the programmed data
to or from a PC using an optional PC interface kit avail-
able through your local RadioShack store.

Table of Contents

Related product manuals