25
Operation
STORING KNOWN FREQUENCIES
INTO CHANNELS
Good references for active frequencies are
Ra-
dioShack's Police Call, Aeronautical Frequency Directo-
ry
, and
Maritime Frequency Directory
. We update these
directories every year, so be sure to get a current copy.
Also see the supplied
Trunking Guide
.
Note:
If you are storing frequencies for an EDACS sys-
tem, you must store them in logical channel number or-
der, with the first frequency in channel 1 for the current
bank.
Follow these steps to store frequencies into channels.
1. Press
MANUAL
, enter the bank (0–9) and channel
number (00–29) where you want to store a fre-
quency, then press
MANUAL
again.
)
))
)
and the bank
and channel number appear at the upper left corner
of the display (for example:
)
))
)òò
òòòò
òòò
òò
ò
).
Note:
When
)
))
)
is on the display, you can also select
your desired bank and channel number with the
FUNC
and arrow keys.
• Press
FUNC
then press
8
88
8
or
9
99
9
. The bank num-
ber moves in the direction of the arrow pressed.
• Press
FUNC
then press and hold
8
88
8
or
9
99
9
. The
bank number moves continuously in the assigned
direction.
• Press
8
88
8
. The channel number moves upward
one by one. Or, press
9
99
9
. The channel number
moves downward one by one.
2. Press
PGM
.
)
))
)
changes to
,
,,
,
.
To Next Page
Loading...
