Radio Shack PRO-94 - Selecting a Preset Fleet Map

59
Selecting a Preset Fleet Map
1. Set the scanner for conventional scanning and
press
PROG
then
TRUNK
to select the bank to
store the fleet map. A previously programmed
trunked frequency appears.
2. Press a number key to select the bank to store the
fleet map.
3. Repeatedly press
V
or
W
to select
E1
, then press
E
.
4. Press
DATA (ALT).
5. Repeatedly press
V
or
W
to select the name of the
desired map (example
E1P7
). The prepro-
grammed fleet map appears.
6. Press
E (SVC)
, then press
SRC (LIMIT).
The scan-
ner then searches for transmissions using the pre-
set map you chose.
Note:
When the scanner searches for transmissions,
you see Type I fleet and subfleet IDs such as
100-12
,
100-9
,
000-12
, or
400-8
.
How do you know if the preset map you selected is cor-
rect? Listen to find out if you are following complete
conversations. If not, try another preset map.
E1P16
Block
Size
Code
0S3
1S10
2S10
3S11
4S0
5S10
6S12
7 (S12)
20-524.fm Page 59 Tuesday, August 31, 1999 3:55 PM