Radio Shack PRO-94 - Page 70

70
BATT. Lo
flashes.
The batteries are
weak.
Recharge the
rechargeable bat-
teries or replace
the non-recharge-
able batteries.
Poor or no recep-
tion.
Batteries are
weak or com-
pletely dis-
charged.
Check the batter-
ies or make sure
the AC adapter or
DC adapter is
connected prop-
erly.
An antenna is not
connected or is
connected incor-
rectly.
Make sure an
antenna is con-
nected to the
scanner.
Error
appears.
Programming
error.
Re-enter the fre-
quency correctly,
including the deci-
mal point.
The scanner
locks on frequen-
cies that have an
unclear transmis-
sion.
Stored frequen-
cies are the same
as “birdie” fre-
quencies.
Avoid storing fre-
quencies listed
under “Birdie Fre-
quencies” on
Page 63, or only
listen to them
manually.
The scanner
does not track a
trunked system.
The transmis-
sion might not
use a system that
can be tracked by
your scanner.
Scan another
transmission.
The data fre-
quency is miss-
ing.
Find the data fre-
quency (see
“Storing Trunked
Frequencies” on
Page 43).
The system you
are trying to track
is a Type I sys-
tem, and the
scanner is set to
scan Type II sys-
tems.
Set the scanner to
receive Type I
trunked frequen-
cies. See “Scan-
ning Type I and
Hybrid Trunked
Systems” on
Page 55.
Problem Possible Cause Remedy
20-524.fm Page 70 Tuesday, August 31, 1999 3:55 PM