Trunking
64
8. If you want to tag the ID,
press
TEXT
, enter the desired
text tag for the ID. Then press
ENTER
(see “Finding and
Storing Active Frequencies”
on Page 32.)
9. To store the next ID memory
in sequence, press
8
88
8
and
repeat Step 4.
10. Press
SCAN
to start scanning.
±
If you entered an ID code that is
already stored in another ID
channel,
:kfbý?:
:kfbý?::kfbý?:
:kfbý?:
appears. If you
want to store the ID code, press
ENTER.
To cancel the operation,
press
CL
.
6#.-")4172"+&"*1.&
You can set your scanner to follow
a trunking signal that you want to
track during scanning. While the
scanner is stopped on a voice
channel (
L9
L9L9
L9
appears), hold down
TRUNK
until
?:ý^ebZýED$
?:ý^ebZýED$?:ý^ebZýED$
?:ý^ebZýED$
appears.
When ID hold is activated and the
scanner receives a voice channel,
8Wdaý&#&
8Wdaý&#&8Wdaý&#&
8Wdaý&#& ED
EDED
ED
?:ýDe$ý&'
?:ýDe$ý&'?:ýDe$ý&'
?:ýDe$ý&'
CEJ0ýded[
CEJ0ýded[CEJ0ýded[
CEJ0ýded[
Next
location
±
"016'"
±
"
• If you made a
mistake in Step 4,
?dlWb_Zý?:
?dlWb_Zý?:?dlWb_Zý?:
?dlWb_Zý?:
. appears
and the scanner
beeps when you
press
ENTER
.
Start again at
Step 3.
• You can enter
either decimal or
AFS code for ED
(EDACS) ID. The
default setting is
decimal ID entry.
When you press
FUNC
then
2
,
7<Iý
7<Iý7<Iý
7<Iý
\ehcWj
\ehcWj\ehcWj
\ehcWjý
ýý
ý
appears
for about 2
seconds. Now you
can enter the ID
code with AFS
8Wdaý&#&
8Wdaý&#&8Wdaý&#&
8Wdaý&#& ED
EDED
ED
?:ýDe$ý&&
?:ýDe$ý&&?:ýDe$ý&&
?:ýDe$ý&&
CEJ0ý&(//(
CEJ0ý&(//(CEJ0ý&(//(
CEJ0ý&(//(
:kfbý?:ý'#'(
:kfbý?:ý'#'(:kfbý?:ý'#'(
:kfbý?:ý'#'(
Duplication
20-525NEW.fm Page 64 Monday, July 1, 2002 2:58 PM
To Next Page
Loading...
