Radio Shack REALISTIC PRO-2042 - Page 21

Notes:
• The scanner automatically pre¬
vents storage of duplicate fre¬
quencies during auto store.
However, you can manually store
a duplicate frequency.
• The scanner does not store
locked-out frequencies during
auto store (see “Locking Out
Channels and Frequencies" on
Page 32).
1. Press AUTO. AUTO appears.
2. Press the number key for each
bank where you want to store fre¬
quencies.
BANK
or
n L
2. J 7 » » tO
inn r i .
IUU. Lit
Etna
Notes:
• To select bank 10, press 0.
• If you select a bank that does
not contain any empty chan¬
nels, a bar flashes under the
bank number, and A-FULL
and auto appear. To enter new
frequencies into this bank, you
must delete one or more fre¬
quencies stored in it, then
repeat Step 2. See “Deleting
Frequencies” on Page 29.
• If you select a bank that con¬
tains at least one empty chan¬
nel, a bar flashes under the
bank number, and AC-, the
number of empty channels in
the bank, Ch, and AUTO
appear.
• If you do not want to select the
bank, press the bank’s number
again. The bar under the bank
disappears.
• If you select more than one bank
and want to review the number of
empty channels in each bank,
turn TUNING to select the bank
you want to review. As you turn
TUNING, a bar flashes under the
selected bank’s number.
3. Press LIMIT. Lo appears.
4. Use the number keys to enter the
lower limit of the frequency range
you want to search, then press
ENTER.
Note:
• If you enter an invalid frequency
in Step 4 or 6, the scanner dis¬
plays Error. Simply repeat
the step.
5. Press LIMIT. Hi appears.
21