Radio Shack REALISTIC PRO-2042 - Frequency Management and Features; Deleting and Sorting Frequencies

DELETING
FREQUENCIES
Deleting a Frequency from a
Channel or Monitor Memory
1. Press PROGRAM.
2. Use the number keys to enter the
channel number or monitor me¬
mory containing the frequency you
want to delete.
3. If you are deleting the frequency in
a channel, press PROGRAM.
If you are deleting the frequency in
a monitor memory, press MONI¬
TOR.
4. Press 0, then press ENTER. The
frequency is deleted.
Note: You can delete all frequencies in
all banks at the same time by resetting
the scanner. See “Restarting/Reset¬
ting the Scanner” on Page 9.
Deleting Frequencies from All
Locked-Out Channels Within
a Bank
You can delete the frequencies in all
locked-out channels within a bank (see
“Locking Out Channels and Frequen¬
cies” on Page 32). This lets you delete
all the old or uninteresting frequencies
in channels you have locked out.
1. Press AUTO, auto appears.
2. Using the number keys, select the
bank's number.
3. Press and hold down ENTER, then
press UOUT.
Deleting Frequencies from All
Channels Within a Bank
You can delete the frequencies in all
channels within a bank. This lets you
quickly delete all frequencies from a
bank if, for example, you want to use
the bank to store a different category of
frequencies.
1. Press AUTO. AUTO appears.
2. Using the number keys, select the
bank’s number.
3. Press and hold down ENTER, then
press CLEAR.
29