9
CONNECTING A DEVICE REQUIRING A
CIGARETTE-LIGHTER SOCKET
1. Turn off the device requiring power.
2. Set the power supply’s
POWER
switch to
OFF
.
3. Pull off the cigarette-lighter socket’s cap on the front of the
power supply.
Note:
Close the socket’s cap when you are not using the
socket.
4. Plug the device’s DC power cord into the power supply’s
cigarette-lighter socket.
5. Connect the power supply’s power cord to a standard 120V AC
outlet. If you have difficulty inserting the plug, don’t force it.
Turn it over and reinsert it.
22-506.fm Page 9 Friday, August 6, 1999 12:55 PM
To Next Page
Loading...
