Radio Shack TRS-80 DWP-510 User Manual

Customer's responsibilities for equipment functionality and operating environment.

Warranty period, defect correction, remedies, and exclusions for equipment and software.

Limits on Radio Shack's liability for damages, losses, and consequential damages.

License terms for using Radio Shack software on a single computer.

Warranty terms cover sales, licenses, and third-party leases of equipment and software.

Detailed illustration and labeling of the printer's front controls and indicators.

Detailed illustration and labeling of the printer's internal components and access points.

Detailed illustration and labeling of the printer's rear connectors and switches.

Step-by-step instructions for installing and removing printer print wheels and ribbon cartridges.

Instructions for loading paper using the printer's friction feed mechanism.

Procedures for connecting the DWP-510 to a power source and a TRS-80 computer.

Steps to perform a self-test and configure setup switches like Pitch and New Line.

Explanation of control codes and examples of using BASIC for printer functions.

Description of special printer functions like Auto New Line and code optimization.

Common problems and solutions for printer operation issues, including do's and don'ts.

Visual representation of characters produced by the DWP-510 using Modified ASCII.

Diagrams and descriptions of input signals from TRS-80 and output signals from the printer.

Detailed pin assignments for the printer's interface connector.

Examples of print samples for different font styles supported by the DWP-510.

Schematic diagrams for the main control logic of the printer.

Schematic diagrams detailing the logic of the printer's power board.

Schematics for selection sensor and pre-amp board logic.

Schematic diagram for the space sensor board logic.

Schematic diagram for the printer's power supply unit.