Radio Shack TRS-80 Model 4 - Page 92

LIB
Command I
Displays a listing of all system commands in Libraries <A>, <B>,
and <C>.
You can use LIB to see a list of TRSDOS commands.
Dir Do Filter Lib
Memory Remove Rename Reset
Device
Load
Set
Library
<A> contains the primary TRSDOS commands, Library <B>
contains the secondary commands, and Library <C> contains the
machine-dependent commands.
Example
LIB (ENTER)
displays a list of the TRSDOS library commands.
Library
<A>
Append Copy
Link List
Route
Run
DumpDate Debug
Sysgen SystemSpool
Create
Verify
Library
<B>
Attrib Auto Build
Free Purge Time
Library
<C>
Forms Setcom Setki
Technical Information
Library <A> is located in the SYS6/SYS system module, Library
<B> is located in the SYS7/SYS system module, and Library <C> is
located in the SYS8/SYS system module. You can remove any of the
three system modules
if you will not be using their commands. (Use
the PURGE or REMOVE library commands to delete system
modules.)
1-87