Radio Shack TRS-80 X-PAD GT-116 - 1; Getting Started; Setting Up the X-Pad

1/ Getting Started . .
.
Before
setting up the
X-Pad,
you'll
need
to connect
your
Color Computer to the
TV.
See your
TRS~80
m
Color
Computer Operation
Manual
for
details.
Do
not
turn
the
Computer's
power
ON!
Figure 1.
X-Pad
The X-Pad
consists
of
three
parts. These are
the:
•
Pen which enables communication
between
the X-Pad
and the
Computer,
•
Pad which
is the
base of
the
GT-116
and
which has an
8-1/2"
x
11"
Writing Surface. Do not write on the Pad!
Always be
sure
to have a sheet of paper
covering
the
Pad's
surface.
•
X-Pad
Interface
Pak
which
is
inserted
into the
cartridge slot on the right
side
of the
Color Computer.
Setting Up
the
X-Pad
Each
time
you use
the
X-Pad,
you should
put
a
sheet
of
standard-sized
8-1/2"
x
IT'
paper over
the
Writing
Surface
of the
Pad,