PG 1
Operation Guide CT100
The CT100 communicating Z-Wave thermostat operates
via a high-quality, easy-to-use touch screen. To set or adjust
The screen will automatically light up and you will hear a
beep. Do not use a sharp or metallic device; it will scratch
the screen.
ENGLISH
Statement of use: 100% Compatible with all popular
residential HVAC systems; 24VAC single, two stage
conventional heating systems (gas/oil/electric), heat pumps
with up to two stages of heat and two stage auxiliary
heat(electric or fossil), zoned forced air and zoned hot water
(2 or 3 wire), millivolt systems (with a 12-24 AC or DC source),
one or two stage cooling, and hybrid systems.
1202-002-002
Power Grid
status
indicator
top cover
Touch screen
Wire
terminals
Mode
button
button
MENU
Reset
button
HVAC
selection
switches
bottom
cover
To Next Page
Need help?
General
