Need help?Do you have a question about the Radio Zeeland DMP Sigma 120 and is the answer not in the manual?
General| Brand | Radio Zeeland DMP |
|---|---|
| Model | Sigma 120 |
| Category | Marine GPS System |
| Language | English |
Details the items included in the Sigma 120 packing.
Lists and describes the necessary components and their specifications.
Guidance on placing and cabling the display unit for visibility.
Instructions for placing the RZ 315 junction box for service and cabling.
Instructions for installing the S-120 junction box near the transducer.
Instructions for installing the RZ 318 interface box near the transducer.
Procedure for mounting the transducer on the ship's hull, ensuring proper placement.
Details wiring from RZ 315 junction box to RZ 1958/A1 or A2 PCB.
Details wiring from RZ 315 junction box to RZ 1958/A3 PCB.
Configuration settings for dipswitches on the RZ 1958/Ax PCB.
Configuration settings for dipswitches on the RZ_1965/Ax PCB for Sigma 120.
Wiring instructions for the S-120 junction box to the RZ 2158/A1,A2,A3 PCB.
Configuration settings for dipswitches on the RZ 1958/Ax PCB for S-120.
Details wiring and power supply connections for the Sigma 120 display unit.
Using the potentiometer to switch the device on and adjust lighting levels.
Using the potentiometer to set the alarm depth between 0 and 4 meters.
Button to check the current alarm depth setting.
Key to switch between small (0-4m) and large (0-40m) depth ranges.
Key to select between transducer 1 and transducer 2.
Key for resetting alarms and performing system tests.
To Next Page
