BH7NOR & BG6QBV Firmware and software downloads：http://avrx.cn
- 25 -
AVRT7PLUSSerialdataprintouthelp
AVRT7 PLUS is not connected to the server, or the network is disconnected to receive an APRS beacon.
The LED will flash quickly.
Please check your network connection. You can connect the PC with the USB serial cable (CH340). Use the
serial port software, the rate of 115200, print serial data, view the server connection
Download serial software, run serial software, AVRT7PLUS serial print output, the output text data
include:
1, boot start process
2, the network server (aprs.fi) connection status (LAN or WIFI)
3, beacon decoding data output
Download APRS client program, serial port connection, run APRS client program, you can display the client
program to decode the data and beacon position
To Next Page
Loading...