RadioLink Electronic Limited
www.radiolink.com
A560 3D Fixed Wing
Vertical Flight with 1 Switch
Assembly & Disassembly Instruction
All electronic components of A560 are already set. If it’s the RTF version(with transmitter T8S and receiver packed), all you need to do after unpacking the box is
to assemble the wing and tail (horizontal stabilizer), which is easy and fast.
Note: If it is the BNP version(without transmitter T8S or receiver packed), please follow the instruction manual of A560 to set channel 5 and channel 7 in your
transmitter.
To Next Page
