4
1. Close windows and doors for
accurate measurement.
Getting Started
3. A measured value is displayed
every 10 minutes. Wait 1 hour for a
more accurate value. It is
recommended that the Radon
Eye is placed for a minimum of
two months between October
15th until April 15th for calculation
of the annual average radon level.
This may vary from country to
country. For additional information
and instructions on how to
calculate the annual radon level
average go to www.radoneye.no.
2. Connect the 12V adapter to
Radon Eye, it will automatically
start. Place the Radon Eye on
a flat surface.
4
To Next Page
Loading...