Certified Antenna
Following is the antennas certified for use with the ‘RADWIN 2000 Alpha INT, RADWIN 5000
SU-Air INT, RADWIN 5000 SU-Pro INT’:
Dual FP Cross Pole
Integrated
Maximum Output Power
5725 – 5850 MHz band - FCC/ ISED
The maximum output power can be set as follows, when operating in the 5.8 GHz band,
under FCC 47 CFR Part 15.407 New Rules and ISED RSS-247 regulations. The power values
are for PtP systems and PtMP systems.
For PtMP systems the total EIRP is limited to 36 dBm. Therefore the conducted output
power of these systems will be limited to 14 dBm.
For PtP systems the highest conducted power shall be limited to 27 dBm.
5150 – 5250 MHz band – FCC
The maximum output power can be set as follows when transmitting in the 5.1 GHz band,
under FCC 47 CFR Part 15.407 New Rules and regulations.
The total EIRP limit for PtP applications is 45 dBm.
The total EIRP limit for PtMP applications is 36 dBm.
2400 – 2483.5 MHz band - FCC/ISED
The maximum output power can be set as follows, when operating in the 2.4 GHz band,
under FCC 47 CFR Part 15.247 and ISED RSS-247 regulations. The power values are for Wi-
Fi systems for HT-20 and HT-40 Channel BW.
The highest conducted output power shall be limited to 17 dBm in HT-20 and to 15 dBm in
HT-40
Radio parameters accessed by end-user
The following parameters can be accessed by user:
1. Output Power
2. Frequency channel
3. Channel bandwidth
RADWIN 2000 Alpha INT, RADWIN 5000 SU-Air INT, RADWIN 5000 SU-Pro INT Reference Guide 2
To Next Page
Loading...