15
Original instruction manual
Congratulations on buying a machine from the fastest growing brand for electric, gasoline and pneumatic machines
- RAIDER. With proper installation and operation, RAIDER are reliable and reliable machines, and the work with them
will bring you real pleasure. For your convenience, there is an excellent service network with 45 service stations all
over the country.
Before using this machine, please read this “Instruction for Use” carefully.
For the sake of your safety and to ensure proper use, read these instructions carefully, including the
recommendations and warnings therein. To avoid unnecessary errors and incidents, it is important that these
instructions remain available for future reference to anyone who will use the machine. If you sell it to a new owner,
the “Instruction for Use” must be handed over to the new owner so that the new user can read the relevant safety
precautions and operating instructions.
“Euromaster Import Export” Ltd is an authorized representative of the manufacturer and owner of the trademark
RAIDER. The address of the company’s management is in Soa 1231, 246 Lomsko Shose Blvd., tel .: 0700 44 155,
934 10 10, www.RAIDER.bg; www.euromasterbg.com; e-mail: info @ euromasterbg.com.
Since 2006 the company has introduced the ISO 9001: 2008 quality management system with scope of
certication: Trade, import, export and servicing of professional and hobby electric, pneumatic and mechanical tools
and general hardware. The certicate is issued by Moody International Certication Ltd, England.
Technical Data
parameter unit value
Voltage V DC
12
Battery type - Li-ion
Battery capacity Ah 2
no load speed min
-1
3800
Number of drive link for saw chain бр./pcs 28
Chain pitch inch “ 1/4
Chain gauge thikness inch“ (mm) .043 (1.1)
Chain oil - EP90
Saw chain speed m/s 5.8
Recommended guide-bar length mm,inch 100 mm, (4”)
EN
Charger
parameter measure value
Voltage V AC 230
Frequency Hz 50
Protection class - II
To Next Page
Loading...