To Next PageTo Next Page
Need help?Do you have a question about the Raider RD-HD54 and is the answer not in the manual?
General| Impact energy | 5 J |
|---|---|
| Impact rate | 0 - 5500 bpm |
| Chuck type | SDS-Plus |
| Drill Capacity (Steel) | 13 mm |
| Power Source | Corded |
Identifies key components and safety symbols shown in diagrams.
Lists the technical specifications and performance metrics of the rotary hammer.
Outlines essential safety precautions for tool operation, work area, and electrical safety.
Details extra safety precautions, such as checking for hidden utilities and proper handling.
Explains how to insert and remove SDS-plus system nozzles from the chuck.
Describes mounting, installing, and removing nozzles using a conventional chuck.
Details how to switch the machine on/off and use the auxiliary handle for stability.
Explains how to use the depth gauge for precise drilling depth control.
Guides users on selecting the correct operating mode for drilling, chiseling, or hammer drilling.
Provides instructions for sharpening chisels, replacing brushes, and general maintenance.
Advises on environmentally friendly disposal of the machine and its accessories.
Illustrates the internal and external components of the rotary hammer with part numbers.
Lists all parts of the rotary hammer with their corresponding numbers and descriptions.
Confirms the product's compliance with relevant EU directives and standards.
Outlines the fields and information required for the warranty card.
Details the conditions, duration, and exclusions of the commercial warranty.
Lists the locations and contact information for authorized service centers.
Provides a log for recording repairs performed under warranty.
