11
Keep proper footing and balance at all times;
15. Maintain tools with care
Keep tools sharp and clean for better and safer performance. Follow instructions for maintenance and
changing accessories. Inspect tool cords and plugs periodically and, if damaged, have them repaired by
a qualied person. Inspect extension cords periodically and replace them, if damaged. Keep handles dry,
clean and free from oil and grease;
16. Disconnect tools
Disconnect tool when not in use, before servicing, or when changing accessories such as blades, bits and
cutters;
17. Remove tool keys
Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before
turning it on;
18. Avoid unintentional starting
Do not carry a plugged-in tool with a nger on the switch. Be sure the switch is o when plugging in;
19. Outdoor use extension cords
When tool is used outdoors, use only extension cords intended for use outdoors and so marked;
20. Stay alert
Watch what you are doing, use common sense and do not operate tool when you are tired;
21. Check damaged parts
Before you use the tool, always carefully check the guarding and other parts to determine that they will
operate properly and perform their intended functions. Check for alignment of moving parts, binding of
moving parts and breakage of parts. Check for proper mounting of all parts and any other conditions that
may aect their operation. A guard, switch or other part that is damaged or defective should be properly
repaired or replaced by a qualied person. Do not use tool, if switch does not turn it on and o;
22. Warning! Use the tool and its accessories in accordance with these safety instructions and in the
manner intended for the particular tool, taking into account the working conditions and the work to be
performed. Use of the tool for operations, dierent from those normally expected to be performed by the
particular tool, could result in a hazardous situation;
23. Have the tool repaired by a qualied person
This electric tool is in accordance with the relevant safety rules. Repairs should only be carried out by
qualied persons using original spare parts, otherwise this may result in considerable danger for the user
24. Disposal.
The machine, accessories and packaging should be sorted for environmental-friendly recycling. The
plastic components are labelled for categorized recycling. Do not dispose of power tools into household
waste! According the European Guideline 2012/19/EC for Waste Electrical and Electronic Equipment and
its implementation into national right, power tools that are no longer usable must be collected separately
and disposed of in an environmentally correct manner.
To Next Page
Loading...
