To Next PageTo Next Page
Need help?Do you have a question about the Rain Bird TBOS 635098 and is the answer not in the manual?
General| Brand | Rain Bird |
|---|---|
| Model | TBOS 635098 |
| Category | Transmitter |
| Language | English |
Details parameters like current time, day, water days, start times, run times, and station assignment.
Covers parameters received by the transmitter, including water days, start times, run times, and irrigation mode.
Explains the cyclical menu system and how icons represent programming functions.
Details specific icons displayed on the LCD screen for programming and status.
Describes the function of each button on the Field Transmitter keypad.
Guide to choosing between 12-hour and 24-hour display formats.
Instructions for setting the current year, month, day, and time.
Explains the use of programs A, B, and C for different plant types and sequential operation.
Describes how assigning stations to programs can achieve near-simultaneous starts.
Details the Standard mode, offering only 7-day cycles, typically for UNIK modules.
Details the Turbo mode, supporting various custom cycles for TBOS modules.
Allows selection of watering days for each program (A, B, C) in a 7-day cycle.
Sets watering for all three programs on even-numbered days.
Sets watering for odd days, excluding the 31st of the month for all programs.
Sets watering for odd days, including the 31st of the month for all programs.
Configures watering to occur every one to six days.
Details how to select specific watering days for a 7-day cycle.
Specifies watering days for even days within the cycle.
Specifies watering days for odd days, excluding the 31st.
Specifies watering days for odd days, including the 31st.
Sets watering days for cycles ranging from 1 to 6 days.
Suspends and overrides all programming in the Control Module, setting it to OFF.
Restores Control Module programming, setting its default mode back to ON.
Initiates single-station or multi-station watering cycles manually.
Initiates watering for a single selected station.
Initiates watering for all programmed stations in sequential order.
Indicates a low battery condition for the Field Transmitter.
Shows low battery for the Control Module when data is transferred.
Steps for changing the battery, including data backup and connector care.
Guidelines for protecting the device, including cover, connector, and LCD display.
Addresses issues with display visibility, often caused by a weak battery.
Solution for a frozen device: remove battery, short contacts, reinstall battery.
Diagnoses and resolves issues related to poor battery connection.
Troubleshoots unresponsive displays or keypads, often due to microprocessor issues.
Identifies reasons for station failure, like missing run time or On-Off mode.
Addresses problems with data transfer, often due to dirty connectors or weak batteries.
Solves missing cycle options by ensuring the transmitter is in Turbo mode.
Ensures compatibility by verifying the Control Module is TBOS, not UNIK, for custom cycles.
