Programming
Tip:
“AUTOMATIC” light
will flash when in
automatic mode.
Programming Changes
! If you avoid the RESET position, Frequency and Run Time dial settings
can be made at any time and will not change your original start time.
! Turn dial from RESET position at the time of day
watering is to start (e.g. at 7:00 am)
1. Set Frequency
(Frequency = How OFTEN you want the water to come on.)
From RESET position, turn dial to
desired setting.
(Example has timer starting once a day.)
2. Set Run Time
(
Run Time = How LONG you want the water to run.)
Set dial to the desired setting.
(Example has timer running for 15 min.)
To Next Page
Loading...
