RainPoint Smart+ HCS008 - 2.2 Installation

2.2 Installation
Option 1: Install the ow meter on
the faucet and tighten it hard.
Option 2: Connect the ow meter
with tubes or hose nozzle.
Note:
1. 1 and 5 are available in dierent type and will be dierentiated by region.
2. Please do not remove the connectors while using.
3. The tting are indivisible pas. Do not split them.
4. The tting and , and are dierent in the type of thread. Do not
change the installation sequence of the ttings.
5. Please follow the ow direction point out on the meter’s body.
6. The work distance is within 320 feet in open area. Please do not leave the
sensor so far from the hub.
- 05 -
1
2
3
4
5
1
1
1
2
2
2
2 3 4
3
4
4
4
5
5
5
3/4" Faucet End Connector （NH Thread/ USA-type）
3/4" Faucet Adapter BSP Thread/ EU-type (gray screw thread)
3/4" Faucet End Connector （BSP Thread/ EU-type）
3/4" Faucet Adapter NH Thread/ USA-type (black screw thread)