Raisecom Gazelle S1020i-GL Series - Characteristics; Figure 1-1 Appearance of the Gazelle S1020 I-2 GF-4 GE-PWH-GL-DC48

Raisecom
Gazelle S1020i-GL (A) User Manual
1 Overview
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
2
Figure 1-1 Appearance of the Gazelle S1020i-2GF-4GE-PWH-GL-DC48
1.2 Characteristics
The Gazelle S1020i-GL is characterized by high reliability:

Adopt an industrial chip and power module, implementing low power consumption.

Adopt an all-metallic shell, and a fanless heat dissipation design.

Support IP40 protection.

Support standard ERPS ring network solution in the industry and 50ms fast service
switching, thus implementing carrier-grade reliability.

Support a wide range of operating temperature from -40 to +75°C (altitude: 0–1800 m).
Be dampproof and corrosion-resistant. Support humidity of 5%–95% in the operating
environment (non-condensing).

Support the Digital Input (DI) interface and relay alarms.

Provide multiple interface types. The uplink interface supports the SFP optical interface.
The downlink interface supports the RJ45 electrical interface.

Support IEEE 802.3 af, IEEE 802.3 at, and IEEE 802.3 bt standards to supply 15 W, 30
W, and 90 W power.

Support Simple Network Management Protocol (SNMP) v1/v2c/v3, Raisecom NView
NNM system, and Command Line Interface (CLI).

Support Dying Gasp.
When the altitude increases by 220 m between 1800 m and 5000 m, the highest
operating temperature of the device decreases by 1°C.