Raisecom Gazelle S1020i-GL Series - 3 Technical Specifications; 3.1 Overall Parameter

Raisecom
Gazelle S1020i-GL (A) User Manual
2 Hardware structure
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
36
Figure 2-27 shows the wiring of the 100 Mbit/s crossover cable.
Figure 2-27 Wiring of the 100 Mbit/s crossover cable
Table 2-28 shows the technical specifications of the cable.
Table 2-28 Technical specifications of the cable
Parameter
Description
Name
CBL-ETH-RJ45/RJ45-D
Connector
RJ45 crystal header
Model
Cat 5 or better STP cable
Number of cores
8
Length
The letter D is the length, which can be customized. For
example, if the customer requires a 2-meter cable, you can
name it CBL-ETH-RJ45/RJ45-2m.
2.7.4 DC power cables
Introduction to DC power cable 1
The DC power cable used by the PoE model supplies 48 VDC power from the power souring
equipment to the power interface on the Gazelle S1020i-GL, and then transmits power to the
entire device.
Appearance of DC power cable 1
The DC power cable used by the PoE model is composed of the DC power connector and
power cable, as shown in Figure 2-28.