11
TS[0] TS[1] …… TS[N] …… TS[31]
V.35 BANDWIDTH
z Timeslot occupation on the PCM30 mode
On the PCM31 mode, N≤30, the 0 and 16
th
timeslots are occupied by the system. N is
counted from the 1
st
timeslot. If N is bigger than 16, it will skip over 16
th
timeslot.
TS[0] TS[1] …… TS[16] …… TS[N+1] …… TS[31]
V.35 BANDWIDTH